- Make sure this fits by entering your model number.
- WINDOW PRIVACY FILM: non-reflective ultra black appearance provides good privacy, avoid glare and darken your room,works great for any private space, such as your bedroom, bathroom and so on.
- ANTI UV & ENERGY SAVING: Blocks Out 99% of Infrared Rays and 95% of UV Rays, sun control and heat reduction in summer, an affordable and convenient option to darken pitch for daytime sleep, prevent furniture from fading and aging.
- REUSABLE: Static cling window film without glue, very easy to remove and reuse, no residue left. Roll up and keep it well when you don’t need it until next time application.
- EXPLOSION-PROOF, WATERPROOF AND MOISTURE-PROOF: Frosted Static Window Film can effectively reduce the probability of glass bursting and protect the safety of people around you. At the same time, it has a matte texture, which can effectively prevent water and moisture.suitable for smooth glass,not fit for wall,uneven glass.
- Easy to install and remove: clean the window, wet it with soapy water, peel off the protective sheet, install the film and squeegee away air bubbles, it will firmly sticks to windows.
The Window Privacy Film Measures fits for most home window, blocks about 99% of the light in day time.
Size: 17in x 6ft (45cm x 2m) (Cut the size you need Before use)
Installation Instructions:
1. Measure your window; Cut the appropriate size of window film(Cut it oversize by a minimum of 2″ in each direction)
2. Clean your window, spray some Soapy water on window.
3. Remove the backing protect sheet (You can use two pieces of tape to grab onto one of the corners on each side of the film to separate the backing & the film)
4. When you install it, apply to wet glass and smooth with hands (stick on one corner first then apply)
5. Use a card to squeegee away air bubbles and redundant water.
6. Trim the excess and Enjoy your works! If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.
Questions and Answers
Q1: Why the window film can’t stick well and fall down?
A: Maybe the transparent backing film wasn’t peeled off, or the edges of film curled and you didn’t deal with it.
Q2: Why the edge of window film curls?
A: The shape of film is just temporarily curly fixed because of the low temperature.
Solution: You can soft the film by blowing hot air like using a hair dryer, the soft window film can attach to the glass very well.
Q3: Why do I need to spray soapy water on the glass?
A: Spraying enough soapy water will be helpful to adjust the position of film, and will make it easier to scrape away the air bubbles.